This type of
cotton cloth wheel is generally cut from raw materials such as twill cotton, coarse fabric, non-woven fabric, and fine plain fabric, and is sewn with strong sewing. The sewing thread is generally in the form of concentric spiral and direct radiation, which has relatively strong grinding force. The specifications can be produced according to the size provided by the customer, and can be used with fine
Polishing Wax.
2、 Wind turbine (air-cooled Cloth turbine)
This type of cloth wheel generally uses fine count cotton fabric as the raw material, and there are also cotton heavy-duty fabrics or canvas as the raw material, cut using a 45 degree angle cutting method, and the overall shape is circular wrinkles, with a central iron installed in the middle.
Due to its 45 degree oblique cutting, the fibers will not fall off, resulting in high cutting efficiency during polishing.
This type of cloth wheel has moderate hardness and good flexibility, suitable for polishing flat surfaces or products with high and low drops, irregular wrinkles, and cooling effect during the polishing process. It can also be subjected to oily treatment to save costs. When used in conjunction with an automatic
Polishing Machine, it can be used with medium and fine
polishing liquid compound and polishing solid compound.
3、 Buckle cloth wheel (non sewn whole cloth wheel)
This type of cloth wheel is generally made of fine soft cotton fabric, and the buckle cloth wheel is generally divided into two types: poplin and anti feather cloth. The difference is that the anti feather cloth has higher hardness and density than poplin, greater grinding force, and more wear-resistant. Can be used with mirror
polishing wax.
This type of cloth wheel is generally used for the final polishing process - mirror treatment, which has good flexibility and slight grinding force. It is suitable for polishing complex shaped workpieces or for precision polishing of small workpieces.
*Precautions for using polishing cloth wheels
1.In order to achieve the best effect of the
Polishing wheel, the required polishing cloth wheel should be configured according to the material and size requirements of the polishing machine.
2.The size of the polishing wheel is determined by the power of the polishing machine motor, and the aperture of the polishing wheel needs to match the motor shaft.
3. The polishing wheel should be placed in the center of the shaft and must be tightened with a wrench, otherwise accidents may occur during high-speed rotation.
4.To ensure the polishing effect, the surface linear speed of the polishing wheel should be uniform. Therefore, if too large a polishing wheel is used with a smaller motor, the linear speed will significantly decrease during polishing, and the polishing effect will also be affected.
Jiangmen Gude Polishing Equipment Co., Ltd
April 13, 2024
