Aluminum profile polishing agent formula

1、 Introduction

Aluminum profile polishing agent is a commonly used surface treatment agent used to improve the surface gloss of aluminum profiles

Brightness and smoothness. This article will introduce a formula suitable for polishing aluminum profiles and provide detailed information

Explain its ingredients and usage methods.

2、 Formula ingredients

(1) Aluminum oxide powder: As the main abrasive, it can remove the oxide layer and impurities on the surface of aluminum profiles, improving surface smoothness.

(2). Silicone oil: As a lubricant, it can effectively reduce friction during grinding, reduce surface wear and scratches.

(3). Polyvinyl alcohol: As a thickener, it can improve the viscosity of Polishing Compound, increase their adhesion and ductility.

(4). Sodium stearate: As an emulsifier, it can dissolve water and oil in the formula, playing a role in emulsification and

Stable effect.

(5). Sodium sulfate: As an acidic regulator, it can adjust the acidity and alkalinity of the formula to adapt to the surface treatment of aluminum profiles.

3、 Formula preparation method

(1). Mix aluminum oxide powder, silicone oil, and polyvinyl alcohol in a certain proportion and stir evenly to form a paste.

(2). Dissolve sodium stearate and sodium sulfate in an appropriate amount of water in another container to form an emulsion.

(3). Slowly add the paste from step 1 to the emulsion from step 2 while stirring continuously

Mix thoroughly and evenly between the two.

(4). Continue stirring until all components in the formula are completely dissolved and form a uniform polishing liquid compound.

(5). Filter the prepared polishing agent to remove impurities and solid particles.

4、 Usage

(1). Clean the surface of the aluminum profile to remove dust and oil stains.

(2). Take an appropriate amount of Polishing Slurry and apply it evenly to the surface of the aluminum profile.

(3). Use polishing cloth or polishing machinery to grind and polish aluminum profiles. Pay attention to the intensity and

Mastering speed to avoid excessive grinding or scratching of the surface.

(4).After polishing, clean the aluminum profile with clean water to remove polishing agent residue and surface impurities.

(5). Finally, dry the surface of the aluminum profile with a clean Cloth to achieve a bright and smooth effect

Fruit.

5、 Precautions

(1).Before using polishing agents, ensure that the surface of the aluminum profile is free of oil stains and impurities to avoid affecting the polishing effect.

(2).During the grinding and polishing process, attention should be paid to the control of force and speed to avoid damage to the surface of aluminum profiles.

(3).When using polishing compound, protective gloves and masks should be worn to prevent irritation to the skin and respiratory system.

(4). During the preparation and use of the formula, safety precautions should be taken to avoid contact with the formula

A high concentration solution of parts.

6、 Conclusion

This article introduces a formula suitable for polishing aluminum profiles, which includes aluminum oxide powder and silicon

Ingredients such as oil, polyvinyl alcohol, sodium stearate, and sodium sulfate. Through reasonable proportioning and preparation

The method can produce an aluminum profile polishing agent with good polishing effect. Used before

During the process, attention should be paid to safe operation and the correct polishing method should be followed to achieve the desired polishing effect. At the same time, it is also necessary to regularly check the quality and effectiveness of the polishing agent, replace or adjust the formula in a timely manner, to ensure the stability and durability of the polishing effect. Application of aluminum profile polishing agent

Using it will help improve the surface quality of aluminum profiles and meet different usage requirements.