Cutting Airway Polishing Wheel Polishing metal surfaces

Cutting Airway Polishing wheel polishing metal surfaces

Non-Wonven Polishing Wheel are a commonly used tool for polishing and polishing metal surfaces. Generally, rough polishing is performed on the workpiece.In the rough polishing stage, we use a cutting airway Polishing Buff Wheel to polish the metal surface, and a polishing buff wheel to polish the oxide layer and rough areas on the stainless steel surface to obtain a relatively flat surface. Firstly, we choose a larger nylon wheel, usually a 6-inch or 8-inch wheel, to improve work efficiency. Then, we evenly apply some abrasive on the wheel to ensure that the surface of the wheel is covered with a thin layer of abrasive. Next, we will fix the wheels on the motor shaft, turn on the power, and let the wheels rotate. Then, we use a polishing wheel to place the metal surface under the wheel and gently press it down to make contact with the metal surface. After a few seconds of polishing, we can see that the metal surface becomes smoother, and the rust and oxide layer on the surface are also removed.relevant Product,please contact us.

We not only produce nylon wheels, but also various polishing wheels and waxes suitable for metal and non-metal polishing. If you choose us, there will always be a suitable one for you.

Product specifications