polishing compound for metal and stainless steel

The steps to use red polishing paste are as follows:
1.Cleaning preparation. Firstly, it is necessary to thoroughly clean the polished object to ensure that the surface is free of impurities and stains. Different types of cleaning agents can be used, such as car cleaner, wood floor cleaner, metal cleaner, etc.
2.Apply polishing compound. Apply the red polishing paste directly onto the Polishing Buff Wheel, and then evenly apply it to the surface to be polished. When applying, the direction should be consistent to ensure that the entire area is covered.
3.Polishing process. Use an electric or manual Polishing Machine to gently polish in a clockwise direction. If it is manual polishing, appropriate force needs to be applied. The speed of the polishing machine should be controlled between 2000 and 3000 revolutions per minute, and the polishing time should not exceed 5 minutes each time to avoid surface scratches.
4.Treatment after polishing. After polishing, the polishing sponge or cloth should be cleaned in a timely manner to keep it clean and tidy, and attention should be paid to moisture prevention. At the same time, to thoroughly remove any residue from the polishing paste, clean water and a cleaning Cloth can be used for wiping.
In addition, when using polishing liquid compound, the following points should also be noted:
Choose a suitable polishing sponge or cloth, based on different materials and polishing effects.
Ensure that there are no obvious scratches or unevenness on the surface, otherwise it will affect the polishing effect.
Pay attention to the safety of using the polishing machine to avoid cable breakage or other dangerous situations.